Office Series Super One HDD Duplicator - HD-S07
- Impeccable copy speed: up to 7.2 GB per min for each port and up to 16 targets.
- Bit-by-bit Data Comparison.
- Supports “Data & System” Copy.
- Percentage Copy.
- Quick Erase, DoD Erase, and Secure Erase.
U-Reach Office series Super one HDD Duplicator Features
Copy Speed is 7.2 GB/m for all devices synchronously.
The speed for one target duplication is the same as for 16 ones. The speed will not decline no matter how many targets are connected.
Supports All Partition Format for Duplication
Bit for Bit Duplication copies all kind of data format
Able to proceed Systems & Files Copy, when device is NTFS, FAT16/32/64, Linux(ext2/ext3/ext4), Mac(HFS/ HFS+/ HFSX) format, to greatly reduce copy time.
4 ways of Sanitization
1.Quick Erase: Takes few seconds to complete
2.Full Erase: Erase the complete HDD
3.DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4.Secure erase: A National Institute of Standards and Technology 800-88 accept technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
upports all major brands of 2.5”, 3.5” SATA HDD/SSD.
Up to 15TB
Support GPT, MBR table format
Support Advanced format HDD
Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
Smart LED Indicator
The LED clearly indicates duplication status. There will not be any confusion anymore.
iSecuLog(Anti-Tampering Log Report)
Any falsification can be detected to ensure report is genuine. You do not need to worry about Log Report is not genuine any more.
Complete standalone system, no computer required. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons completes all the jobs)
Firmware upgrade available with well-experienced team support.
128MB X 8
|Maximum Speed Supported
||7.2 GB/min (real test with 16 HDD fully loaded)
||Stand alone operation, no PC required
||Monochrome LCD Display
||LED (Red/Blue) on each slot
||4 push buttons (▲ / ▼ / OK / ESC)
Quick Copy (System and Files), All Partitions,
Whole HDD, Percentage Copy
||Bit by bit compare
||Quick Erase, Full Erase, DoD Erase, Secure Erase
|Skip Bad Sector
||Self-setting Bad sector tolerance from 0 to 65535
||Support all major brands of 2.5”, 3.5” SATA HDD/SSD
||Support GPT, MBR table format
|Support Advanced format HDD
|Support big capacity HDD up to 15TB above
|HDD Format supported for Whole HDD Copy
||All types of Format
|HDD Format supported for Quick Copy
||Support FAT16/32, exFAT, Mac System (HFS/ HFS+/ HFSX),? Linux(Ext2/Ext3,Ext4), NTFS
|Input Voltage Required
||100V ~ 240V
||5°C ~ 45°C
||-20°C ~ 85°C
||20% ~ 80%
||5% ~ 95%
||23.23" x 22.83" x 12.99" (59cm x 58cm x 33cm)
||FCC, CE, RoHS