Octave Rainbow PLA Filament 1.75mm 1.33kg (2.94lbs) 4 Color Red-Green-Blue-Yellow Spool
Octave Rainbow filament spools cannot be used to feed two colors simultaneously on dual extruder 3D printers.
Availability: In stock
For Afinia, FlashForge, RepRap, MakerBot, UP, PrintrBot, MakerGear, Solidoodle, Ultimaker, and other 3D printers
Each color weighs 0.33kg (0.73 lbs) and the reel itself weighs 0.46kg (1.02 lbs).
Afinia and UP 3D printers will require an Octave Extruder Nozzle 8 Setting Temperature Switch in order to use the PLA Filament.
Octave Rainbow PLA Filament gives you a choice of filament colors on one reel to print with from a pre-packaged selection. No need to stop and change reels anymore; just drop in an Octave Rainbow PLA filament reel and swap colors as you go.
Octave Rainbow PLA 1.75mm Filament in 1.33kg (2.94lbs) spool. High quality 1.75mm Red, Green, Blue, and Yellow PLA filament from Octave. Produces excellent 3D printing results.
High quality PLA filament, manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing and fewer extruder nozzle problems.
|Color||Rainbow spool - Red, Green, Blue and Yellow
|Filament diameter||1.75 mm +/- 0.10mm|
|Roundness||1.75mm +/- 0.07mm|
|Print temperature||210 - 250°C|
|Spool capacity||1.33 kg (2.94 lbs)|
|Reel Diameter||20 cm (7.87”)|
|Reel Width||11.5 cm (4.53”)|
|Hub diameter||5.2 cm (2.05”)|
|Hub width||10.5 cm (4.13”)|
|Country of Manufacture||China|
|Custom Stock Status||N/A|
|Filament Color||Rainbow - Red Green Blue Yellow|
|Filament Weight||1.33kg (2.94lbs)|