U-Reach 1-7 Quality Professional SD & MicroSD Duplicator - SD908QP
Impeccable copy speed: up to 1.5GB per min for each port and up to 120 ports
Availability: In stock
1-7 Quality Professional SD & MicroSD Duplicator - SD908QP
- Standalone, no PC required to operate the duplicator.
- Impeccable copy speed: up to 1.5GB per min for each port and up to 120 ports.
- Supports all types of data format copying while doing bit for bit duplication.
- Supports “quick copy” for Linux (ext2/ext3/ext4) and NTFS, FAT16/32.
- The USB stick can have a capacity up to 64GB.
- Easy maintenance for quick swap USB module.
U-Reach SD & MicroSD Duplicator Features
Impeccable High Speed
U-Reach USB drive duplicators are capable of copying at 1.5GB/m on all devices simultaneously, with no slowing down even the number of targets increases.
Supports Linux formats for quick copy features
Quick copy only copy contained data in any NTFS, Linux (ext2/ext3/ext4) and FAT 16/32 to save your time.
Copy all kind of data format while bit for bit duplication.
With a specially redesigned and improved structure, users can easily exchange the sockets via THREE steps within ONE minute.
Unscrew and remove the cover of the socket - Rplace a damaged socket with a new one - Screw the cover
Powerful H5 Flash Quality Checking Tool
Media check-H5 is the best inspection tool that helps to do quality testing with big volume quantity with the highest efficiency. H5 offers：
- Highest efficiency：checks the bulk quantity all at the same time.
- Shows quality testing results
Bad：Bad sector quantity
W：Writing speed is 7.26MB/s
R：Reading speed is 14.4MB/s
Red Light indicates that the Flash didn't meet the selected standard.
- Self-setting standard
a. Sets a limitation on the bad sector quantity
b. Sets the minimum reading speed
c. Sets the minimum writing speed
Flash speed and capacity filtration
Sets limit of lowest reading and writing speed, it picks up Flash devices that are below the setting speed.
Set "target tolerance", it picks up Flash devices that have exceeded the tolerance range.
Effortless Media Insertion and Removal
Guide rails to make flash insertion and removal easier, which also greatly enhances production efficiency.
Safely Remove Hardware design
After the duplication task is completed, the Intelligent 9 USB drive duplicator will automatically cut down the power and signal to USB devices. Users can remove the USB sticks directly without any concern.
Ergonomic & Compact Dimension
The ergonomic dimension is smaller than the traditional Flash Duplicator by 50% to 70%.
- Apply new advanced Multi-Core processor.
- Complete standalone system, no computer required.
- Comply with USA Department of Defense (DoD) data security standard provides DoD Erase function.
- 4 kinds of professional quality diagnostic tools for Flash module.
- "A2 Fake Picker" shows accurate capacity of USB/Memory card to get rid of low quality or fake flash media.
- "Speed Check" shows Reading and Writing speed of the Flash module within 8 seconds.
- "H3/H5 Media Check" shows the quantity of bad block though bit for bit examination.
- 2 second format, 3 models available for selection.
- Supports Synchronous and Asynchronous modes for Copy/Compare/ Erase/ Format function.
- Strict bit-by-bit hardware comparison further increases the reliability of duplication.
- User-friendly interface with real time information LCD display.
- Firmware upgrade available with well-experienced team support.
|Support media||SD Memory Card, MicroSD Memory Card|
|LED||LED (Green/Red) on each slot|
|Power Supply||12V 5A adaptor|
|Humidity||Operating||20% ~ 80%|
|Storage||5% ~ 95%|
|Temperature||Operating||0°C ~ 75°C|
|Storage||-20°C ~ 85°C|
|System Dimension(cm)||9.49" x 7.68" x 4.53" (24.1cm x 19.5cm x 11.5cm)|
|Carton Dimension(cm)||13.98" x 13.19" x 11.42" (35.5cm x 33.5cm x 29cm)|
1.The system 1 year warranty and Flash slot board is 6 month warranty.
2. over 40 ports is customized and lead time will be 2 weeks.
|Country of Manufacture|